In addition to our Helical Wall Anchoring system, Helitech offers a similar wall repair solution. Our Plate and Rod Wall Repair System includes a technology that attaches to the inside of your foundation walls. The main difference with the plate and rod system is that it is adjustable and must be maintained.
Step 1 – Anchoring points are determined and pilot holes are drilled at a descending angle.
Step 2 – Anchor locations in stable soil are carefully measured and marked. Sod plugs are removed and anchor holes are dug to proper depth.
Step 3 – Steel rods are driven through the wall and earth in order to reach the anchor holes.
Step 4 – Steel cross plate anchors attach to the rod in each hole.
Step 5 – Adjustments are set on the anchor rods to maintain the new wall position.
Step 6 – Future adjustments may be needed as soil density changes over time.